Installing eSIM Manually (iOS)

You can only download the

eSIM profile once! Please do not remove the eSIM from your device settings until you are done using it.

You cannot restore a deleted eSIM profile.

Internet is required to install eSIM. Connect to Wi-Fi or use the mobile Internet of the primary SIM card.

To manually install eSIM on iPhone, you need to know the following:

  1. SM-DP;

  2. Address Activation Code.

Please follow the instructions below 👇

  1. Open «eSIM» → «My eSIM» → select purchased eSIM and click on Actions (...) → «Profile eSIM»;

  1. Copy data from the eSIM profile;

  2. On your iOS device open «Settings» → «Network and Internet» → «Mobile network» → «Add» → «Download SIM card» → «Need help» → «Enter manually» → paste «Activation Code» into the appropriate field;

  3. Wait for the eSIM to register on the network. This usually takes less

    than a minute;

  4. Turn on the «Data Roaming» mode on your device on this SIM card by opening «Settings» → «Network / Internet» → «Mobile Network» → turn on Roaming.

  5. That's it! You've installed eSIM!

Last updated